Electoral district

This article is about areas forming a single electorate. For subdivisions of such an area, see Electoral precinct and Polling station.

"Constituency" redirects here. For other uses, see Constituency (disambiguation).

An electoral (congressional, legislative, etc.) district, sometimes called a constituency, riding, or ward, is a geographical portion of a political unit, such as (a country, state or province, city, or administrative region, created to provide the voters therein with representation in a legislature or other polity. That legislative body, the state's constitution, or a body established for that purpose determines each district's boundaries and whether each will be represented by a single member or multiple members. Generally, only voters (constituents) who reside within the district are permitted to vote in an election held there. The district representative or representatives may be elected by single-winenr first-past-the-post system, a multi-winner proportional representative system, or another voting method.

The district members may be selected by a direct election under wide adult enfranchisement, an indirect election, or direct election using another form of suffrage.

Terminology

Further information: Lists of electoral districts by country and territory

National and supranational representatives from electoral districts typically have offices in their respective districts. This photo shows the office of a Member of Parliament in the United Kingdom.

The names for electoral districts vary across countries and, occasionally, for the office being elected. The term constituency is commonly used to refer to an electoral district, especially in British English, but it can also refer to the body of eligible voters or all the residents of the represented area or only those who voted for a certain candidate.

In American English, the term congressional district is used.

In Canadian English, the term electoral district is used officially, but are colloquially known as a riding or constituency. In some parts of Canada, constituency is used for provincial districts and riding for federal districts. In colloquial Canadian French, they are called comtés ("counties"), while circonscriptions comtés is the legal term.

In Australian and New Zealander English, electoral districts are called electorates, while the term electorate refers specifically to the entire body of voters.

In India, electoral districts are referred to as "Nirvācan Kṣetra" (Hindi: निर्वाचन क्षेत्र) in Hindi, which can be translated to English as "electoral area" though the official English translation for the term is "constituency". The term "Nirvācan Kṣetra" is used while referring to an electoral district in general irrespective of the legislature. When referring to a particular legislative constituency, it is simply referred to as "Kṣetra" along with the name of the legislature, in Hindi (e.g. 'Lok Sabha Kshetra' for a Lok Sabha constituency). Electoral districts for buli municipal or other local bodies are called "wards".

Local electoral districts are sometimes called wards, a term also used for administrative subdivisions of a municipality. However, in the Republic of Ireland, voting districts are called local electoral areas.

District magnitude

District magnitude refers to the number of seats assigned to each district, and in conjunction with number of districts, determines the number of district seats to be filled in an election. Staggered terms are sometimes used to reduce the number of seats up for election at any one time, when district magnitude is more than one.

The term District magnitude was first used by the American political scientist Douglas W. Rae in his 1967 dissertation The Political Consequences of Electoral Laws.

The district magnitude affects the ease or difficulty to be elected, as the effective threshold, or de facto threshold, decreases in proportion as the district magnitude increases, unless a non-proportional or pro-landslide election system is used such as general ticket voting.

The effect of varying district magnitude explains Duverger's observation that single-winner contests tend to produce two-party systems, and proportional representation (PR) methods tend to produce multi-party systems. where multi-member districts are used, threshold de facto stays high if seats are filled by general ticket or other pro-landslide party block system (rarely used nationwide nowadays).

Duverger drew a correlation between proportional representation and multi-party systems ( fragmentation). But many counter-examples exist, as PR methods combined with small-sized multi-member constituencies, of DM of less than 5 for example, sometimes produces a low number of effective parties. Malta with only two major parties is a stark example of divergence from Duverger's rule. (Meanwhile, systems that use First-past-the-post system election system sometimes elect members of five different parties depending on local conditions in the multitude of separate micro-battles across a country.)

Contests with district magnitude of 1 mostly use plurality voting in single-member districts (First-past-the-post voting) but instant-runoff voting is used in other cases. In both systems each voter has one vote.

District magnitude is larger than 1 where multiple members are elected (plural districts). Such districts usually use one of these systems: plurality block voting (where voter may cast as many votes as the number of seats to be filled), list proportional representation, single transferable vote elections (where each voter casts just one transferable vote). In other cases, each seat is filled through separate contest usually through first past the post.

In STV elections DM normally range from 2 to 10 members in a district. But 21 are elected in a single contest conducted through STV in New South Wales (Australia).

In list PR systems DM may exceed 100, but in many cases the average DM under list PR is only about 14.

District magnitude is maximized where:

• jurisdictions with a single electoral district for the whole elected body (at-large voting). This includes the legislatures of: the Netherlands (1 district for 13 million and 150 seats), Mozambique (13 million, 250 seats), Serbia (6.584 million, 250 seats), Israel (9.862 million, 120 seats), Slovakia (4.4 million, 150 seats), and Moldova (3 million, 101 seats). In each of these cases, it takes less than a percentage point of the nation's electorate to capture a seat.
• systems use a two-tier form of party-list proportional representation, using both local multi-member constituencies (of various district magnitudes and seat-to-vote disproportions), and national leveling seats, when the nationwide results have priority (Mixed-Member Proportional). That is the case in Scandinavia: Sweden (6.53 million, 349 seats, see national apportionment of MP seats in the Riksdag article), Denmark (4.2 million, 179 seats), Norway (3.7 million, 169 seats), and Iceland (0.2 million, 63 seats). Since 2017, Germany's Bundestag is also made up of additional members meant to make up for imbalances in the number of MPs (members of parliament) by state caused by overhang seats.
• systems use a two-tier form of party-list proportional representation, using both local single-member districts, and national leveling seats, when the nationwide results have priority (Mixed-Member Proportional). New Zealand uses such an MMP system.

DM is moderate where districts break up the electorate or where relatively few members overall are elected, even if the election is held at-large.

District magnitude may be set at an equal number of seats in each district. Examples include: all districts of the Northern Ireland Assembly elected 6 members (5 members since 2017); all those of the Parliament of Malta send 5 MPs; Chile, between 1989 and 2013, used a method called binomial voting, which assigned 2 MPs to each district.

In many cases, however, multi-member constituencies correspond to already existing jurisdictions (regions, districts, wards, cities, counties, states or provinces), which creates differences in district magnitude from district to district:

• Republic of Ireland for the Dáil Éireann: 3-, 4-, and 5-member districts. (STV is used)
• Hong Kong for half of the Legislative Council of Hong Kong: 5- to 9-member districts.
• The New Hampshire House of Representatives: 1- to 10-member districts (Plurality block voting is used).
• South Africa 26.7 million registered people and 400 seats (with 200 filled in nine provincial party lists and 200 elected according to PR. Provincial representation in the National Assembly, elected in province-wide districts, ranges from 5 seats in the Northern Cape to 48 seats in Gauteng.

In a system where the intent is to avoid the waste of votes, a set proportion of votes, as a minimum, assures the election of a candidate. This is set as the inverse of the district magnitude plus one, plus one, the Droop quota. Droop is the mathematical threshold that is the mathematical minimum whereby no more can be elected than there are seats to be filled, if all the successful candidates were to receive quota. (Such calculation is rendered un-necessary if even one vote is exhausted or rejected at a later stage in the count.) In such elections, a large proportion of votes are used to elect someone.

For instance, in a system that uses party vote tallies to allocate seats, a 10%-polling party will not win a seat in a 5-member district but will do so in a 10-member district as its 10 percent of the vote means it is due one seat of the ten. Thus, a threshold of ten percent in a ten-seat district is equivalent to a Hare quota.

Similarly in a STV contest, a candidate that accrues Droop quota will be elected. STV is intended to avoid waste of votes by the use of transferable votes but even in STV, if the rules permit voters not to rank all the candidates or prevent them from ranking all the candidates, some votes are declared exhausted. Thus it is common for one or two members in a district to be elected without attaining Droop.

In systems where a noticeable number of votes are wasted, such as Single non-transferable voting or Instant-runoff voting where transferable votes are used but voters are prohibited from ranking all candidates, you will see candidates win with less than Hare or even Droop.

Larger district magnitudes means larger districts, so reduces the possibility and practice of gerrymandering, Gerrymandering is the practice of partisan redistricting by means of creating imbalances in the make-up of the district map, made easier by a multitude of micro-small districts. A higher magnitude means less wasted votes, and less room for such maneuvers. As well, a fair voting system in the district contests also means that gerrymandering is ineffective because each party gets their fair share of seats however districts are drawn, at least theoretically.

Multiple-member contests sometimes use plurality block voting, which allows the single largest group to take all the district seats. Each voter having just one vote in a multi-member district, Single voting, a component of most party-list proportional representation methods as well as single non-transferable vote and single transferable vote, prevents such a landslide.

Minorities

High district magnitude is a major factor in the inclusion of minorities.

Plurality (and other elections with lower district magnitudes) are known to limit the representation of minorities. John Stuart Mill had endorsed proportional representation (PR) and STV in the mid-19th century precisely to respond to this shortcoming.

With lower district magnitudes, the only way to include demographic minorities scattered across the country is to force parties to include them:

• women: some gender quotas may compel registered parties to a certain sex ratio between the candidates they put forward in single-seat districts. Zippered or gender-balanced party lists can be forced where multiple-member districts are used. Gender quotas can also be an internal policy, as the one used by the Labour Party since 1995 (see all-women shortlist).
• ethnic groups:
  • such a system is in use in Singapore which requires one team member (at least) to be of a different race from the others. This is the system of the numerically dominant group representation constituencies.
  • in the United States, the Supreme Court ruled that districts should be drawn to create a number of minority-majority districts proportional to the minority population of the area (see majority minority in the United States). This is an implicit, not explicit requirement, based on zoning.
  • in New Zealand, the Māori electorates have been in use for over a century so that voters of Māori extraction can elect their own MPs; contrary to the US' solution, the Māori electorates overlap the generic electorates. And unlike the US, the distinction between ethnicities is explicit.

Large district magnitudes increase the chance for diverse walks of life and minority groups to be elected. However, it is not synonymous with proportional representation. The use of "general ticket voting" prevents the multiple-member representation of the district from being mixed and balanced. Where list PR is used in the district, a closed list PR method gives the party machine, not the voters, the power to arrange the candidates on the party list. In this case, a large district magnitude helps minorities only if the party machine of any party chooses to include them. In a multi-member district where general ticket voting is not used, there is a natural impetus for a party to open itself to minority voters, if they have enough numbers to be significant, due to the competitive environment produced by the electoral system.

Apportionment and redistricting

Main articles: Apportionment and Redistricting

Apportionment is the process of allocating a number of representatives to different regions, such as states or provinces. Apportionment changes are often accompanied by redistricting, the redrawing of electoral district boundaries to accommodate the new number of representatives. This redrawing is necessary under single-member district systems, as each new representative requires their own district. Multi-member systems, however, vary depending on other rules. Ireland, for example, redraws its electoral districts after every census while Belgium uses its existing administrative boundaries for electoral districts and instead modifies the number of representatives allotted to each. Israel and the Netherlands are among the few countries that avoid the need for apportionment entirely by electing legislators at-large.

Apportionment is generally done on the basis of population. Seats in the United States House of Representatives, for instance, are reapportioned to individual states every 10 years following a census, with some states that have grown in population gaining seats. By contrast, seats in the Cantonal Council of Zürich are reapportioned in every election based on the number of votes cast in each district, which is only made possible by use of multi-member districts, and the House of Peoples of Bosnia and Herzegovina, by contrast, is apportioned without regard to population; the three major ethnic groups – Bosniaks, Serbs, and Croats – each get exactly five members. Malapportionment occurs when voters are under- or over-represented due to variation in district population.

In some places, geographical area is allowed to affect apportionment, with rural areas with sparse populations allocated more seats per elector: for example in Iceland, the Falkland Islands, Scottish islands, and (partly) in US Senate elections.

Gerrymandering

Main article: Gerrymandering

Gerrymandering is the manipulation of electoral district boundaries for political gain. By creating a few "forfeit" districts where opposing candidates win overwhelmingly, gerrymandering politicians can manufacture more, but narrower, wins for themselves and their party. Gerrymandering relies on the wasted-vote effect, effectively concentrating wasted votes among opponents while minimizing wasted votes among supporters. Consequently, gerrymandering is typically done under voting systems using single-member districts, which have more wasted votes.

While much more difficult, gerrymandering can also be done under proportional-voting systems when districts elect very few seats. By making three-member districts in regions where a particular group has a slight majority, for instance, gerrymandering politicians can obtain 2/3 of that district's seats. Similarly, by making four-member districts in regions where the same group has slightly less than a majority, gerrymandering politicians can still secure exactly half of the seats.

However, any possible gerrymandering that theoretically could occur would be much less effective because minority groups can still elect at least one representative if they make up a significant percentage of the population (e.g. 20–25%), compared to single-member districts where 40–49% of the voters can be essentially shut out from any representation.

Swing seats and safe seats

Main articles: Marginal seat and Safe seat

Sometimes, particularly under non-proportional or winner-takes-all voting systems, elections can be prone to landslide victories. As the result in each district is not related to votes cast elsewhere and may not reflect a party's national popularity, a candidate can often be elected with the support of only a minority of votes, leaving the majority of votes cast wasted, and thus a moderate winning vote of say just 34 percent repeated in several swing seats can be enough to create a landslide increase in seats won by a government.

The district-by-district basis of 'First past the post voting' elections means that parties will usually categorise and target various districts by whether they are likely to be held with ease, or winnable by extra campaigning, or written off as a foregone loss hardly worth fighting for.

A safe seat is one that is regarded as very unlikely to be won by a rival politician based on the constituency's past voting record or polling results.

Conversely, a marginal seat or swing seat is one that could easily swing either way, and may even have changed hands frequently in recent decades - the party that currently holds it may have only won it by a slender margin and a party that wants to win it may be able to take it away from its present holder with little effort. In United Kingdom general elections and United States presidential and congressional elections, the voting in a relatively small number of swing seats usually determines the outcome of the entire election. Parties aspire to hold as many safe seats as possible, and high-level politicians, such as prime ministers, prefer to stand in safe seats.

In large multi-party systems like India, a small shift in election results, sometimes caused by swing votes, can lead to no party taking a majority of seats, causing a hung assembly. This may arise from a significant number of seats going to smaller regional parties instead of the larger national parties which are the main competitors at the national or state level, as was the situation in the Lok Sabha (Lower house of the Parliament of India) during the 1990s.

Constituency work

Elected representatives may spend much of the time serving the needs or demands of individual constituents, meaning either voters or residents of their district. This is more common in assemblies with many single-member or small districts than those with fewer, larger districts. In a looser sense, corporations and other such organizations can be referred to as constituents, if they have a significant presence in an area.

Many assemblies allow free postage (through franking privilege or prepaid envelopes) from a representative to a constituent, and often free telecommunications. Caseworkers may be employed by representatives to assist constituents with problems. Members of the U.S. Congress (both Representatives and Senators) working in Washington, D.C., have a governmentally staffed district office to aid in constituent services. Many state legislatures have followed suit. Likewise, British MPs use their Parliamentary staffing allowance to appoint staff for constituency casework. Client politics and pork barrel politics are associated with constituency work.

Special constituencies with additional membership requirements

Main article: Reserved political positions

In some elected assemblies, some or all constituencies may group voters based on some criterion other than, or in addition to, the location they live. Examples include:

• By ethnic groups: Communal constituencies in Fiji; reserved seats in India for Anglo-Indians and scheduled castes and scheduled tribes; Māori electorates in New Zealand.
• By qualification: University constituency in Ireland and formerly the United Kingdom, functional constituency in Hong Kong.
• By residence outside the country: Overseas constituencies in France and Italy.

Voting without constituencies

Not all democratic political systems use separate districts or other electoral subdivisions to conduct elections. Israel, for instance, conducts parliamentary elections as a single district. The 26 electoral districts in Italy and the 20 in the Netherlands have a role in the actual election, but no role whatsoever in the division of the seats. Ukraine elected half of the Verkhovna Rada (the Ukrainian Parliament) in this way in the elections in October 2012.

See also

• Gerrymandering constituency boundary manipulation for political gain
• Multi-member districts in the United States